新式夹心型光透薄层光谱电化学电解池

本文设计了一种新式夹心型光透薄层紫外-可见光谱电化学池。该池采用铂网工作电极,两侧平行放置铂片为对极置于同一石英窗口夹层中,同时以聚四氟乙烯隔离膜作为边际限制器,结合池内小孔道设置内参比点进行精确的电位控制,具有理想的光谱电化学响应。利用循环伏安、循环电位-吸收、恒电位现场光谱、双电位跃-计时电量、双电位跃-计时吸收等技术,对铁氰化钾在氯化钾溶液中的行为进行了表征。     

高锰酸钾-鲁米诺化学发光体系分子印迹-后化学发光法测定奋乃静

结合分子印迹技术,建立了测定奋乃静的分子印迹-后化学发光(MI-PCL)分析方法。方法的线性范围为1.0×10-4-1.0×10-2g/L,线性相关系数为0.9984;相对标准偏差为4.3%(Cs=1.0×10-3g/L,n=11);方法的检出限为3×10-5g/L。本法应用于尿样中奋乃静含量的测定,结果令人满意。     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

A Phosphorescent Platinum(II) Bipyridyl Supramolecular Polymer Based on Quadruple Hydrogen Bonds

A platinum(II) bipyridyl complex bearing bis‐ureidopyrimidinone (Pt‐bisUPy) has been designed and its self‐assembling behavior has been thoroughly investigated by ¹H NMR, DOSY NMR, Ubbelohde viscometry analysis, UV/Vis, and emission spectroscopies. Pt‐bisUPy underwent concentration‐dependent ring‐chain polymerization in apolar solvents. Hydrogen‐bonding interactions play an important role during the formation of the supramolecular polymers. Hydrogen‐bonded supramolecular polymers were transformed to nanoparticles in water through the miniemulsion method. These nanoparticles showed strong π–π excimeric emission. Metal‐metal‐to‐ligand charge transfer (MMLCT) from Pt–Pt interactions was not significant in the emission spectrum. The phosphorescence of the nanoparticle persisted even under aerobic conditions. The triplet state of these phosphorescent nanomaterials were long‐lived and possessed moderate emission quantum yields. Furthermore, the low toxicity of these materials promises a place for them in in vitro and in vivo bioimaging.     

Sell through a local retailer or operate your own store? Channel structure and risk analysis

Either a company store or a local retailer can be used to establish a sales channel. For high-value products with an existing competing brand, this choice represents a crucial decision a brand-named manufacturer must make for a new market. Under the burden of high operating costs, a weak local retailer may find it difficult to sustain and using it may hurt the manufacturer’s chance to successfully establish the channel. We consider a chain-to-chain competition model comprising two manufacturers and two retailers, in which one retailer may be unable to continue its operation because of high financing costs. We identify a threshold policy for the manufacturers to select the channel structure. Interestingly, we find that channel integration is not always better. Without the consideration of contract termination risk, the manufacturer will bear the operating expenses when its opportunity cost is low or the retailer’s financing cost is sufficiently high. In equilibrium, the manufacturers will choose either (decentralized, decentralized) or (integrated, integrated) channel structure. However, when the termination risk is considered, the equilibrium channel structure would be more likely (integrated, integrated) or (integrated, decentralized).